This is my 3rd revision on the Gaffi stick model. After trooping with it a few times I had some areas I wanted to improve on.
The core is now a 1″ dowel. This makes it more rugged, and the print uses less filament since the opening in the middle is bigger.
The tolerances are tightened up, so the fit of the parts should be less sloppy.
Alignment holes for parts that were tricky to glue correctly. Use 1.75mm filament or 16 ga. wire to align!
The geometry on the pineapple is less crazy. That’s purely on the modeling side and has nothing to do with printing it, but it makes me happy.
I’ve also added some variety on the parts. There are 2 different sized pineapples, 2 different size mace heads, and 2 different spikes. You can mix and match whichever ones you like.
I’ve also got a mix of larger parts for printers with more Z height, and smaller parts for printers that can’t do a 12″ tall part.
Since this is going to get banged around a bit (assuming you are costuming with it!), I recommend printing it using wood filament with 4x perimeters, 4x tops and 4x bottoms. For the pineapple you really want the spike pretty solid. I did 45% infill there. You could probably do less, or use different settings for different heights. I like having the weight there.
Same for the mace. Doing 4 perimeters makes the blades and tip of the spike pretty darned solid. I use black for this one.
download the files on: https://www.thingiverse.com/thing:3552988
Every Thursday is #3dthursday here at Adafruit! The DIY 3D printing community has passion and dedication for making solid objects from digital models. Recently, we have noticed electronics projects integrated with 3D printed enclosures, brackets, and sculptures, so each Thursday we celebrate and highlight these bold pioneers!
Have you considered building a 3D project around an Arduino or other microcontroller? How about printing a bracket to mount your Raspberry Pi to the back of your HD monitor? And don’t forget the countless LED projects that are possible when you are modeling your projects in 3D!
LIVE CHAT IS HERE! http://adafru.it/discord
Adafruit on Instagram: https://www.instagram.com/adafruit
Shop for parts to build your own DIY projects http://adafru.it/3dprinting
3D Printing Projects Playlist:
3D Hangout Show Playlist:
Layer by Layer CAD Tutorials Playlist:
Timelapse Tuesday Playlist:
Connect with Noe and Pedro on Social Media:
Noe’s Twitter / Instagram: http://instagram.com/ecken
Pedro’s Twitter / Instagram: http://instagram.com/videopixil
Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.
Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.
Join us every Wednesday night at 8pm ET for Ask an Engineer!
No comments yet.
Adafruit has a “be excellent to each other” comment policy. Help us keep the community here positive and helpful. Stick to the topic, be respectful of makers of all ages and skill levels. Be kind, and don’t spam – Thank you!