Thank you to Joseph IT9YBG for submitting his article describing how he has made an RTL-SDR based panadapter for his TECSUN PL660 portable shortwave radio. The post is a series of pictures that show how Joseph was able to open the PL660 and connect a coax cable to the IF output, and mount the connector on the plastic cover for easy access. He then connects that IF output to the RTL-SDR via a 10pF capacitor.
The result is that Joseph is able to receive the IF output of the PL660 at 451 kHz in SDRUno with his RTL-SDR Blog V3 running in Q-Branch direct sampling mode. He notes that although the IF bandwidth from the PL660 is small, it is possible to decode digital signals by passing the audio demodulated by SDRUno into decoding software.